![]() b43-phy0 ERROR: DMA TX reset timed outĭpkg-query: no packages found matching b43-fwcutter_015-9_bĭpkg-query: no packages found matching b43-fwcutter_019-2_amd64. b43-phy0: Found Radio: Manuf 0x17F, ID 0x2055, Revision 4, Version 0 b43-phy0: Found PHY: Analog 5, Type 4 (N), Revision 2 b43-phy0: Broadcom 4321 WLAN found (core revision 12) Per the request below: lspci -knn | grep Net -A3 rfkill listĠ3:00.0 Network controller : Broadcom Inc. I could detect no change in behavior, however. This allows the OS to see the card, but the card could not find any networks. So, I followed the recommendations and did the following: sudo apt update There is an extensive list for different cards, but not this particular revision. Thanksįor the attention to the problem, have read through the (excellent) instructions on getting these cards working on linux. The wireless card works, but is not seen by the new os at all. I just installed Ubuntu 18.04 on an old macbook air with core 2 duo. Otherwise, this chip could be added to the list with the right fix. If there are stability problems, I will report back here. I did not try anything else to fix the problem (except read about it).Īpparently, a third reboot was all that was necessary. I did yetĪnother reboot, and that seems to have done the trick, for some reason. UPDATE: requested more information, which I provided. It was also answered by Pilot6, but a comment at the bottom shows that at least one person had the same problems I have, that it is does not work after reboot. I also found this post from a couple of years ago: I also used ifconfig to shut down and restart the driver, but no love. After the reboot, the card no longer sees any ssid. I installed hplip, which required a reboot. Second update: It was too good to be true. ![]()
0 Comments
Leave a Reply. |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. Archives
December 2022
Categories |